Куки за автокранове

Предлагаме различни куки за автокранове както и само куки в гайка така и куки с ролков блок.По долу на страницата ще намерите пълно упътване за различните куки който предлагаме.

CAN-Bus/J1939 Multiplexed Vehicle Control


According to AVIONI®, multiplexing is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. For the automotive industry, this means reducing wiring while increasing complexity and possibilities, such as better systems control, the share of more information and it facilitates the creation of links between different systems. Multiplexing can also add on to the safety and reliability of your systems.

In the automotive industry, CAN communication protocols are now widely used as a standard to communicate between all controllers in a given vehicle.
AVIONI® Multiplexing Solutions integrate step by step electrical/electronic systems in order to optimize not only the individual performance of each control, but to ensure that the whole vehicle behaves more efficiently by using the multiplexing technology. Year after year, we pushed the limits of the multiplexing technology further away on various systems, in such ways that no one had imagined it possible.

Boat Travel Lift LMI System


AVIONI® AV.LMI.TRL electronic control system is preferably a proportional weight and moment limiter that works by comparing the load value, measured by sensitive loadcell, and with optional rotary encoder sensors with the previously recorded values. The system offers the following features:
Instant load vs. limit load comparison. On-screen Tare feature.

  • Audible and visual warning
  • Rope End warning on screen
  • On-Screen work hour
  • Black box (event-logger) for fault and limit exceedances
  • Multi-langual user interface

Touchscreen CAN-Bus HMIs

As AVIONI® we offer built-in eventlogger featured and IP65 displays for outdoor use that can provide both J1939/CAN-Bus and Ethernet/Wi-Fi communication. The general features of our operator displays are as follows:

  • Screen size options are 3.5″ – 4.3″ – 7″ – 10.2″
  • CPU: 32bit 720MHz ARM Cortex A8
  • RAM: 512 Megabyte (DDR-III)
  • Flash Memory: 4 Gigabyte (EMMC)
  • Resolution: 800×480 pixel
  • Multilingual fonts and right-to-left option
  • Built-in event and alarm logger (black-box)
  • Touchscreen: Resistive allowing use with gloves
  • USB Port: proper to update software, connecting camera and transfer eventlogger data to flash memory.
  • SD Card: proper to transfer eventlogger data to SD card.
  • Serial port: RS232, RS485, RS422
  • CAN-Bus feature: 2.0B
  • Both of USB camera & IP camera over network are supported.
  • Printer & Scanner are supported
  • Power Supply: 12Vdc / 24Vdc
  • CE certified: EN 61000-6-2:2005 ve EN 61000-6-4:2007
  • FCC certified: FCC Class A

Inclinometer & Angle Sensor

3-Axis In 1 Sensor
Inclinometer And Angle Sensor With High Resolution


  • Inclinometer (X-Y) and Angle (Z) axis in one sensor (2 in 1)
  • Dual axis (X-Y) ±60° measurement in horizontal position (INCLINOMETER feature)
  • Single axis (X-Y) 0..360° measurement in vertical position (ANGLE SENSOR feature)
  • Signal Type: Configurable CAN-Bus (optional: 0..5V 12 bit analog)
  • Built-in filter that compensates sensitivity between axes
  • The built-in filter response can be set with the CAN message.
  • High inclinometer sensor resolution (X-Y): 0.1° (Range: -60.0° ~ +60.0°)
  • Very high angle sensor resolution (X-Y) (Z): 0.01° (Range: 0.00° ~ 359.99°)
  • By the CAN message, the angle resolution can be set to 0.1°. (Range: 0.0° ~ 359.9°)
  • Accuracy: ±0.1°
  • CAN Node-ID: 1..127 adjustable (Default: 1)
  • Baudrate: selectable at 20 kbps, 50 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps (default: 250 kbps)
  • CAN message period: 50 ms, 100 ms, 500 ms, 1000 ms can be selected (Default: 100 ms)
  • Heartbeat message: 0x700 + Node-ID
  • Optional redundancy


  • Power Supply: 9..30Vdc (Reverse Polarity Protection)
  • Connector Type: M12 5pin (male or female upon request)
  • High Protection Class: IP67
  • Operational Temperature: -30..+70 °C
  • Dimensions: 90x60x40mm (L x W x H)
  • Mounting: Horizontally or vertically with 2 pieces of M6 screw.
  • Durable ABS material reinforced with fibrous structure.
  • Housing Color: can be manufactured upon your vehicle