Публикувано на

Куки за автокранове

Предлагаме различни куки за автокранове както и само куки в гайка така и куки с ролков блок.По долу на страницата ще намерите пълно упътване за различните куки който предлагаме.

Публикувано на

CAN-Bus/J1939 Multiplexed Vehicle Control

PDF

According to AVIONI®, multiplexing is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. For the automotive industry, this means reducing wiring while increasing complexity and possibilities, such as better systems control, the share of more information and it facilitates the creation of links between different systems. Multiplexing can also add on to the safety and reliability of your systems.

In the automotive industry, CAN communication protocols are now widely used as a standard to communicate between all controllers in a given vehicle.
AVIONI® Multiplexing Solutions integrate step by step electrical/electronic systems in order to optimize not only the individual performance of each control, but to ensure that the whole vehicle behaves more efficiently by using the multiplexing technology. Year after year, we pushed the limits of the multiplexing technology further away on various systems, in such ways that no one had imagined it possible.

Публикувано на

Boat Travel Lift LMI System

PDF

AVIONI® AV.LMI.TRL electronic control system is preferably a proportional weight and moment limiter that works by comparing the load value, measured by sensitive loadcell, and with optional rotary encoder sensors with the previously recorded values. The system offers the following features:
Instant load vs. limit load comparison. On-screen Tare feature.

  • Audible and visual warning
  • Rope End warning on screen
  • On-Screen work hour
  • Black box (event-logger) for fault and limit exceedances
  • Multi-langual user interface
Публикувано на

XLoader: Weighing System For Excavators

PDF

XLoader: Weighing System For Excavators

AVIONI® xLoader is a simple and convenient system that can be applied to Excavators in every kind and in different tonnage. With the audible and visual warning screen and the advanced CANbus processor, it provides measurements with a maximum deviation of ± 3% as long as it is used in recommended conditions. The weighing resolution displayed on the screen is ±10 kg sensitive.

xLoader Weighing System has the following features:

  • Display of lifted load with IP67 sensors
  • Quick setup and on-screen calibration (no computer required)
  • Communication with CAN-Bus protocol
  • Service / maintenance planning (optional)

With the operation of the system, the signals from 3 pieces of ANGLE and the hydraulic PRESSURE sensor and the CAN messages are checked. If there is no information from any sensor, the corresponding alarm message is displayed on the screen, audible warning (buzzer) is heard

Weighing Record:
Each bucket weighing each time you press the ADD button on the touch screen is added to the TOTAL load. Even if the system is turned off and on, the total load is stored in the memory as long as the RESET button is not pressed.
Thanks to this feature, the load carried by loading trucks with the xLoader Weighing System can be calculated without having to go to the weighbridge. Thanks to the built-in black box, backwards weighing of 1000 weighings (Date-Time and Weighing) are recorded on the screen.

Optional Camera:
Thanks to the sophisticated xLoader display, the back view camera can be connected to the installer. Thus, both the scale and the camera are monitored via the xLoader screen..

Optional Printer:
With the in-vehicle printer showing the total weighing that will replace the weighbridge, the total load information on each load can be taken as output from the printer connected to the screen.

Публикувано на

ILoader: Weighing System For Front Loaders

PDF

ILoader: Weighing System For Front Loaders

AVIONI® iLoader is a simple and convenient system that can be applied to Front Loader in every kind and in different tonnage. With the audible and visual warning screen and the advanced CANbus processor, it provides measurements with a maximum deviation of ± 1% as long as it is used in recommended conditions. The weighing resolution displayed on the screen is ±10 kg sensitive.

iLoader Weighing System has the following features:

  • Display of lifted load with IP67 sensors
  • Quick setup and on-screen calibration (no computer required)
  • Communication with CAN-Bus protocol
  • Service / maintenance planning (optional)
  • With the operation of the system, the signals from the ANGLE and the hydraulic PRESSURE sensor and the CAN messages are checked. If there is no information from any sensor, the corresponding alarm message is displayed on the screen, audible warning (buzzer) is heard

Weighing Record:
Each bucket weighing each time you press the ADD button on the touch screen is added to the TOTAL load. Even if the system is turned off and on, the total load is stored in the memory as long as the RESET button is not pressed.
Thanks to this feature, the load carried by loading trucks with the iLoader Weighing System can be calculated without having to go to the weighbridge. Thanks to the built-in black box, backwards weighing of 1000 weighings (Date-Time and Weighing) are recorded on the screen.

Optional Camera:
Thanks to the sophisticated iLoader display, the back view camera can be connected to the installer. Thus, both the scale and the camera are monitored via the iLoader screen..

Optional Printer:
With the in-vehicle printer showing the total weighing that will replace the weighbridge, the total load information on each load can be taken as output from the printer connected to the screen.